Operation tips for using CK6152A Automated CNC Machine Tool

2025-12-12 16:27:45

In recent years, with the continuous improvement of the technological level of CK6152A Automated CNC machine tool, they have been widely used. On the basis of numerical control technology, it can be said that there are many details to pay attention to in the operation of CK6152A Automated CNC Machine Tool equipment, so as to grasp the details reasonably and ensure more efficient and fast work. So, what details do we need to pay attention to?

1. The working temperature should be controlled between 0-35 degrees Celsius to avoid direct sunlight exposure. Therefore, it is necessary to equip corresponding lighting equipment during the operation process, so as to continuously improve the machining accuracy.

Therefore, the temperature control requirements must be strictly controlled to ensure that the processing quality meets strict standards.

2. The operating environment for Automatic CNC punching machine should be preferably in a relatively sealed factory building, so as to ensure good precision and minimize deformation of machine tools during operation.

So, in the process of practical operation, it is still necessary to master it comprehensively, in order to have a guarantee in processing and gain the recognition and trust of customers.

3. The working environment of inclined guide rail machine tools should also be kept away from places where liquids splash, as such humidity environments are relatively low. It will also be better in terms of processing quality and surface workmanship.

Due to the fact that inclined guide rail machine tools need to spray coolant most of the time during processing to rinse and cool the workpiece and cutting tools at once, the presence of iron shavings and cutting fluid can cause poor working conditions in some parts, especially for the travel switch of the tool holder on CNC automatic lathe, which may flush in the iron shavings and make the contact's extension and contraction not flexible enough. In this case, we need to be diligent and clean it in a timely manner.

In addition, during some cutting processes, strip-shaped iron chips may also be generated, which can easily wrap around the tool and workpiece, affecting the cooling effect and causing compression, and damaging the tool. Timely cleaning is also necessary.

In short, some issues that should be paid attention to during the use of CNC automatic lathe should be taken seriously throughout the entire process in order to fully utilize the efficiency of the machine tool, improve processing quality, and generate expected benefits.